Fabrication and characterization of flexible natural cellulosic fiber composites through collaborative modification strategy of sodium hydroxide and γ-Aminopropyl triethoxysilane

The primary purpose of this work is to study the fabrication of a flexible natural cellulosic fiber composite. In this respect, natural cellulosic fiber was obtained by modified poplar wood fiber through sodium hydroxide (NaOH) and γ-Aminopropyl Triethoxysilan. Then, the composites were fabricated by hot-pressing the modified wood fibers and polyurethane following characterization. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and scanning electron microscope (SEM) observation results confirmed that some of the hemicellulose and lignin were removed from wood fibers after NaOH modification and successfully grafted with alkoxy structures after KH550 modification. NaOH&KH550 modification improved the interfacial compatibility between poplar wood fibers and polyurethane. The flexibility of the composites was improved (the slenderness value was reduced by 113 %), allowing flexible deformations such as bending, twisting, and knotting. In addition, thermal stability, tensile strength (increased by 105 %), elongation at the break (increased by 125 %), and water resistance were increased. This flexible natural cellulosic fiber composite is expected to be applied in the veneering of curved materials and special-shaped structure furniture, providing a theoretical basis for improving the added value of wood-based composites.