Evaluation of 20 Elements in Soils and Sediments by ED-XRF of Monochromatic Excitation

There is an urgent need for the accurate analysis of heavy metal contamination in the field of ecology and environmental sciences, especially in the case of trace heavy metals, such as cadmium. Using doubly curved crystals (DCC) to achieve the monochromatic X-ray excitation of the sample to be measured and a silicon drift detector (SDD) to collect the fluorescence of the sample elements, combined with an algorithm analysis of the fundamental parameters (FP), the monochromatic energy-dispersive X-ray fluorescence (MED-XRF) system significantly improved the detection limits of the target elements. The detection limits, precision, and accuracy of the MED-XRF acquisition for 20 elements, including cadmium, lead, and arsenic, were evaluated and compared with the Determination of Inorganic Elements in Soil and Sediment Wavelength-Dispersive X-ray Fluorescence Spectrometry report and tested on the actual samples. The test results showed that the detection limit of the inorganic elements in soil and sediment determined by MED-XRF was mostly better than the industry standard, especially the detection limit of Cd, which was 0.04 mg/kg. The accuracy and correctness fully met the requirements for daily laboratory testing and, as a quality control tool, the actual sample testing and laboratory ICP-MS results were consistent. The research conducted in this project constituted a useful attempt to expand and improve the analytical methods for inorganic elements in soil and sediment, showing that MED-XRF is superior to conventional ED-XRF and WD-XRF and is the current new method of analysis for a low content of Cd in soil. MED-XRF offers a very important contribution to research on soil census, conservation, the rational use of agricultural land, and soil restoration and improvement, and provides strong support for field testing.