烧结
电解质
材料科学
颗粒
电化学
氧气
化学工程
还原气氛
氧化物
锂(药物)
快离子导体
冶金
电极
复合材料
化学
医学
有机化学
物理化学
工程类
内分泌学
作者
Hwa Jung Kim,Hyeokjun Park,Jung Hyun Kim,Sun Hwa Park,Hosun Shin,Seokhee Lee,Seung‐Wook Baek
摘要
Abstract High‐temperature sintering is essential for the densification of garnet‐type solid electrolytes to achieve high ion conductivity and suppression of Li‐dendrite growth. In this study, the densification and electrochemical performance of Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZT) electrolyte was optimized by controlling the oxygen content of the atmosphere during sintering. Electrochemical tests were performed on sintered and densified pellets at oxygen contents between 0.005 and 99.995 vol.% using a gassing approach. The relative density and critical current density were optimized to 97.6% and 1.0 mA/cm 2 , respectively, at a high oxygen content. As oxygen content increased, sintered pellets exhibited increased lithium‐oxide content by inhibiting Li‐loss, facilitating densification. These results are expected to promote the implementation of high‐quality LLZT electrolyte and solid‐state batteries by exploiting the role of oxygen content during sintering. This study shows that high‐quality manufacturing can be achieved with low‐cost, pressureless sintering.
科研通智能强力驱动
Strongly Powered by AbleSci AI