纳米复合材料
材料科学
复合材料
材料试验
牙科复合材料
生物相容性
纳米技术
牙种植体
生物材料
生物相容性材料
纳米颗粒
作者
Priyanka Chaudhary,Tsui‐Yun Chung,Chieh-Ming Tsai,Wei‐Fang Su,Y T Huang,Meng‐Fang Lin
标识
DOI:10.1021/acsbiomaterials.6c00466
摘要
Abstract This work reports the preparation of a fibrous nanocomposite based on a poly(methyl methacryl/SiO2) nanocomposite and cellulose nanofiber (CNF) (PMECS) for a photocurable 3D-printed dental material. The PME-based resin was prepared by mixing methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDMA), and PMMA powder. Incorporation of acrylate functionalized SiO2 nanoparticles and CNF nanofibers into the PMMA matrix further improved the mechanical performance of the composites. The photocuring process promoted rapid polymerization, minimized defects, and enhanced dimensional stability. The resin was fabricated into incisor-shaped artificial teeth using stereolithography (SLA). Mechanical evaluation by Vickers hardness testing (HV) revealed a substantial increase in hardness from the neat resin PME (36 ± 3.8 HV) and PME/CNF (PMEC, 45 ± 2.4 HV) to the optimized PMECS65 hybrid composite (126.11 ± 4.3 HV). Notably, the 3D-printed teeth exhibited the highest hardness value (195 ± 5.4 HV), attributed to their enhanced interconnected fibrous morphology. Cytotoxicity tests confirmed the biocompatibility of the composites. These findings demonstrate that the fibrous PMECS resin significantly enhances the long-term strength and reliability of 3D-printed prosthetic dental strategies, making it an ideal material for high-end restorative dentistry.
科研通智能强力驱动
Strongly Powered by AbleSci AI