材料科学
微观结构
腐蚀
冶金
耐磨性
奥氏体
包层(金属加工)
铁氧体(磁铁)
复合材料
水下
图层(电子)
铝
质量分数
激光器
相(物质)
压痕硬度
转化膜
合金
涂层
内容(测量理论)
硬度
摩擦学
作者
Yang Yang,Weiwei Yin,Yixuan Zhang,Jie Su,ZiYuan Qi,Zhen Luo
标识
DOI:10.1002/adem.202502063
摘要
Fe–Cr–Ni‐based coatings with different Al 2 O 3 contents (0, 5, and 10 wt%) are successfully prepared by the underwater local dry laser cladding. The microstructure, corrosion resistance, and wear resistance of the coatings are investigated. The results indicate that all coatings contain ferrite (δ) and austenite (γ). As the Al 2 O 3 content increases from 0 to 10 wt%, the δ phase fraction increases, and the hardness of the cladding layer shows an upward trend, reaching the highest value at 10 wt% Al 2 O 3 content. Similarly, both wear resistance and corrosion resistance are also improved. The increase in Al 2 O 3 content promotes solid‐solution strengthening and fine‐grain strengthening of the Fe–Cr–Ni‐base coating.
科研通智能强力驱动
Strongly Powered by AbleSci AI