Review on Gassing Tendency of Different Insulating Fluids towards Transformer Applications

This paper reports the critical reviews on the gassing tendency of different insulating fluids along with the precautionary measures to be considered during their fault diagnosis in transformer insulation. The experimental techniques and procedures for identifying the gassing due to electrical and thermal stress along with the stray gassing phenomenon has been elucidated. The different interpretation schemes used for determining the faults in transformers results in unexpected errors when the historical data relating to mineral oil is used for the other alternative fluids. Mineral oil and natural ester show a positive gassing tendency compared to synthetic ester which exhibit a negative gassing tendency. The stray gases are mostly due to breakage of C-C bonds under normal operating temperature of transformer. Among the different hydrocarbons, hydrogen and ethylene are more predominantly formed under lower temperatures. The silicone oil and ester fluids are more stable even under localised hot spots simulated observing a lesser gassing compared to the mineral oil. The impact of additives along with the oxygen and water content in the insulating fluids can lead to the stray gas’s causing confusion towards the identification of actual faults occurring in transformers. Furthermore, the regeneration of insulating fluids using different adsorbents reduces the gassing tendency depending on the number of cycles used for its reclamation.