Backward Extrusion of Aluminum Alloy Sections Used in Aircraft Structural Components / Wyciskanie Przeciwbieżne Kształtowników Ze Stopów Aluminium Stosowanych Na Elementy Konstrukcji Lotniczych

The paper presents an analysis of selected aluminum alloys as structural materials used in production of aircraft parts as well as specification of technological parameters of Al alloys extrusion on a backward press with their effect on mechanical properties, microstructure and quality of the final product. Upsetting tests with backward extrusion complex cross-sectional profile tests were conducted on aluminum alloys 7075, 2024, 2099. Based on the results, specifications of forging in the form of unit stress - effective strain relations were determined using logarithmic deformation index, allowing proper choice of extrusion parameters. The range of temperatures for hot plastic treatment along with range of extrusion rate for the analyzed thin-walled aircraft profiles were determined. Tests were also conducted on the microstructure of Al alloys in the initial state as well as after the extrusion process had been completed. It has been proved that the proper choice of parameters in the case of a specific profile extruded from Aluminum alloys 2024, 7075, 2099, allows the manufacturing of products of complex crosssections and the quality required in aerospace industry. This has been demonstrated on the example of complex cross-sectional profiles using elements of varied wall thickness.