光致聚合物
材料科学
多孔性
玻璃化转变
聚合物
热塑性塑料
复合材料
聚脲
高分子化学
化学工程
单体
工程类
涂层
作者
Christian Gorsche,Christoph Schnoell,Thomas Koch,Norbert Moszner,Robert Liska
出处
期刊:Macromolecules
[American Chemical Society]
日期:2018-01-16
卷期号:51 (3): 660-669
被引量:28
标识
DOI:10.1021/acs.macromol.7b02321
摘要
Photopolymerizable glues and cements that offer debonding on demand (DoD) through an external stimulus are of great interest for the fields of recycling and repair. State-of-the-art DoD solutions often require a high-energy impulse (e.g., >200 °C, strong force), which is due to the typical glassy nature of such photopolymer networks. Herein, various blocked isocyanates (BICs) that enable thermally induced gas formation at temperatures far below 200 °C are studied. Thermally induced gas bubble formation is accomplished within a linear, thermoplastic poly( N -acryloylmorpholine) matrix above glass transition temperature, introducing porosity. The resulting porosity within the material then causes mechanical failure. However, highly cross-linked photopolymer networks remain unchanged due to their glassy nature at temperatures well above 150 °C. A BIC-based thermolabile photopolymerizable cross-linker is prepared in order to create a polymer network with cleavable cross-link. Additionally, a β-allyl sulfone-based chain transfer reagent is used to tune the final cross-linking density and thermomechanical properties of the material. Above the resulting sharp glass transition (>60 °C), plastic deformation becomes possible, thus allowing formation of porosity. This introduces a covalently cross-linked, thermolabile photopolymer with a tailored network architecture as potential glue for DoD at ∼150 °C.
科研通智能强力驱动
Strongly Powered by AbleSci AI