Facile Synthesis of Conductive Metal−Organic Frameworks Nanotubes for Ultrahigh‐Performance Flexible NO Sensors

Abstract Cu‐benzenehexathiol (Cu‐BHT) has attracted significant attention due to its record high electrical conductivity and crystal defects Cu 2c . However, the nonporous structure and small specific surface area of Cu‐BHT with two‐dimensional kagome lattice invariably limit its practical application in sensing and catalysis. In this work, Cu‐BHT nanotubes (Cu‐BHT‐NTs) are designed and prepared via a facile homogeneous reaction to solve these problems. Compared with the traditional nanorod‐like structure, the Cu‐BHT‐NTs not only have a higher specific surface area but also possess a higher proportion of crystal defects (66.6%). The successfully configured DPPTT/Cu‐BHT‐NTs heterostructure organic field‐effect transistor (OFET)‐based sensor exhibits excellent sensitivity as high as 13 610%, a minimum detection limits down to 5 ppb, and exceptional selectivity to nitric oxide (NO) toxic gases. Theoretical analysis systematically shows that Cu 2c sites in the Cu‐BHT‐NTs increase the number of electrons transferred from the heterostructure to NO molecules, confirming that the high sensitivity and selectivity result from the high binding between Cu‐BHT‐NTs and NO molecules. Furthermore, a fully flexible device based on the heterojunction OFET sensor is prepared to ensure the convenience of wearing and carrying gas sensors, opening up a new avenue for the next generation of wearable intelligent electronics.