材料科学
纳米复合材料
复合材料
小角X射线散射
聚偏氟乙烯
极限抗拉强度
静电纺丝
纳米颗粒
相(物质)
成核
聚合物
纳米纤维
结晶
化学工程
纳米技术
物理
散射
工程类
光学
有机化学
化学
作者
Francisco Sebastian Navarro Oliva,N. Sanjeeva Murthy,Luc Lenglet,Alejandro Ospina,Steven L. Weigand,Fahmi Bédoui
出处
期刊:Polymer
[Elsevier BV]
日期:2024-07-14
卷期号:308: 127406-127406
被引量:11
标识
DOI:10.1016/j.polymer.2024.127406
摘要
In this study, 15 % w/w polyvinylidene fluoride (PVDF)–Fe3O4 nanoparticle (NP) nanocomposite scaffolds were prepared using coaxial electrospinning with a high-speed conductive rotating collector to obtain aligned fibers. The effects of varying the Fe3O4 NP size (6, 9, and 14 nm in diameter) on the fiber morphology, mechanical response, and piezoelectric phase content were investigated. In situ X-ray diffraction measurements during heating-cooling and tensile tests were carried out using synchrotron radiation to study the charge in the β-phase content and polymer chain orientation under different conditions. At zero strain, the presence of smaller NPs seems to impede the β-phase crystallization in PVDF. However, heating-cooling cycles revealed that the NPs acted as nucleation agents, promoting a higher β-phase content after cooling compared to pure PVDF. The mechanical response showed that nanocomposites with smaller NPs exhibited higher stiffness. While the initial degree of polymer chain orientation was higher in the nanocomposites, the presence of NPs hindered the α-to-β phase transformation and chain alignment under tensile deformation compared to pure PVDF. This study highlights the complex interplay among NP size, β-phase formation, mechanical properties, and chain orientation in PVDF-Fe3O4 nanocomposites, providing insights into tailoring their piezoelectric performance for various applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI