纳米材料
兴奋剂
材料科学
激发
丁醇
正丁醇
金属有机骨架
化学工程
纳米技术
光电子学
分析化学(期刊)
化学
环境化学
物理化学
有机化学
乙醇
吸附
工程类
电气工程
作者
Yinzhong Liu,Xiaoshun Wei,Yun Guo,Lingchao Wang,Hui Guo,Qingjie Wang,Yanru Qiao,Xiaotao Zhu,Xuechun Yang,Lingli Cheng,Zheng Jiao
出处
期刊:Sensors
[Multidisciplinary Digital Publishing Institute]
日期:2025-07-18
卷期号:25 (14): 4480-4480
被引量:6
摘要
Volatile organic compounds (VOCs) are presently posing a rather considerable threat to both human health and environmental sustainability. Among these, n-butanol is commonly identified as bringing potential hazards to environmental integrity and individual health. This study presents the creation of a highly sensitive n-butanol gas sensor utilizing cobalt-doped zinc oxide (ZnO) derived from a metal–organic framework (MOF). A series of x-Co/MOF-ZnO (x = 1, 3, 5, 7 wt%) nanomaterials with varying Co ratios were generated using the homogeneous co-precipitation method and assessed for their gas-sensing performances under a low operating temperature (191 °C) and UV excitation (220 mW/cm2). These findings demonstrated that the 5-Co/MOF-ZnO sensor presented the highest oxygen vacancy (Ov) concentration and the largest specific surface area (SSA), representing the optimal reactivity, selectivity, and durability for n-butanol detection. Regarding the sensor’s response to 100 ppm n-butanol under UV excitation, it achieved a value of 1259.06, 9.80 times greater than that of pure MOF-ZnO (128.56) and 2.07 times higher than that in darkness (608.38). Additionally, under UV illumination, the sensor achieved a rapid response time (11 s) and recovery rate (23 s). As a strategy to transform the functionality of ZnO-based sensors for n-butanol gas detection, this study also investigated potential possible redox reactions occurring during the detection process.
科研通智能强力驱动
Strongly Powered by AbleSci AI