材料科学
沟槽
电介质
光电子学
MOSFET
栅极电介质
电子工程
电气工程
晶体管
工程类
电压
复合材料
图层(电子)
作者
Enrico Brusaterra,E. Bahat Treidel,Pallabi Paul,Martin Damian Cuallo,Frank Brunner,Ina Ostermay,Oliver Hilt
标识
DOI:10.1109/tsm.2025.3596980
摘要
In this work, vertical GaN trench MOSFETs have been fabricated by implementing hafnium oxide (HfO2) layered with aluminum oxide (Al2O3) as gate dielectric to improve the device performance when compared to devices using Al2O3 only. The transistors with HfO2/Al2O3 layered gate dielectrics show up to$3\times $higher forward current,$5\times $higher gate breakdown voltage and substantially reduced threshold voltage shift induced by gate forward voltage stress when compared to transistors using Al2O3 layered gate dielectric. Higher channel mobility ($\sim ~11.1$cm2/Vs) and reducedon-state resistance ($3.1~\pm ~0$.6 m$\Omega \cdot $cm2) were also observed as a result of the improved gate module. Post-deposition temperature stability of pure HfO2 layers as well as layered dielectrics combining both HfO2 and Al2O3 is tested combined with plasma pre-deposition surface treatment of gallium nitride to reduce interface trap density. Metal-insulator-semiconductor capacitors have been used as test structures for quick electrical characterization. Pure HfO2 layers show stability up to 500 ° C and present a relative dielectric constant of 17.5 and breakdown electric field of 6.5 MV/cm. The layered dielectric features a lower relative dielectric constant of 12.8 while keeping the same temperature stability and breakdown field. Further, the flat band voltage shift induced by positive voltage stress is reduced while keeping a low interface state density. Such advantages are correlated to trench MOSFET performance improvement.
科研通智能强力驱动
Strongly Powered by AbleSci AI