材料科学
电解质
分离器(采油)
复合材料
电化学
锂(药物)
纳米技术
化学工程
电极
化学
热力学
医学
物理
工程类
内分泌学
物理化学
作者
Seong Gyu Lee,Kyu Seok Kim,Seihyun Shim,Dayoung Jun,Ji Eun Jung,Tae Eun Kim,Jeongmin Lee,Eun-Ji Seo,Se Hwan Park,Yun Jung Lee
出处
期刊:Small
[Wiley]
日期:2025-09-18
卷期号:21 (44): e08049-e08049
被引量:3
标识
DOI:10.1002/smll.202508049
摘要
Abstract Among the challenges facing Li‐metal all‐solid‐state‐batteries (ASSBs), achieving stable low‐pressure operation remains a formidable task owing to limited interfacial contact and Li‐dendrite growth. In this study, a simple yet scalable approach is presented to address these issues via a dual‐functional additive strategy. Sulfide‐based solid electrolytes (SEs) are reformulated by incorporating mechanically robust and lithium‐scavenging Li 4 Ti 5 O 12 (LTO) particles through powder mixing and cold pressing. Careful control of particle size localized smaller LTO particles at grain boundaries and pores without disrupting the bulk Li‐ion conduction network. The resulting LTO‐incorporated composite solid electrolyte (LTO‐CSE) simultaneously offers mechanical reinforcement and electrochemical scavenging/current homogenization via zero‐strain lithiation, without imposing mechanical stress within the SE matrix. The LTO‐CSE exhibits enhanced stability at high current densities even under low stack pressures, without requiring warm isostatic pressing, not in pouch cells but in custom‐built spring‐loaded cells. Notably, it raises the critical current density from 4.5 to 7.5 mA cm −2 at 10 MPa. Furthermore, full cells demonstrate over 900 stable cycles without short‐circuiting, delivering a high areal capacity of ≈3.5 mAh cm −2 under 10 MPa, and stable operation even at pressures as low as 2 MPa. This work establishes a generalizable design framework for next‐generation solid‐state batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI