复合材料
材料科学
环氧树脂
硅烷
玻璃纤维
尺寸
相间
粘附
模数
纤维
动态力学分析
X射线光电子能谱
聚合物
极限抗拉强度
弹性模量
化学工程
工程类
艺术
视觉艺术
生物
遗传学
作者
Sigrid Assengone Otogo Be,Armand Fahs,L. Bélec,Saadia Belkessam,Guy Louarn,Jean‐François Chailan
摘要
Abstract The objective of the present work is to understand how the main constituents of sizing modify the interfacial strength, the mechanical properties of epoxy composites as well as their durability. In this study, two model interphases between E‐glass fibers and epoxy resin were designed and studied in terms of adhesion and mechanical strength from nano to macroscale. The first one is made from a reactive sizing of APTMS silane coupling agent and DGEBA pre‐polymer film‐former. The other one contains a non‐reactive MTES silane and neutralized DGEBA film‐former. The sizings were evidenced by SEM/AFM observations and XPS spectroscopy. The characterization of the prepared composites by AFM nano‐mechanic mode, micromechanical tests revealed the effect of the sizing chemistry on the interfacial properties between glass fibers and matrix. The interfacial strength is more important for the composites reinforced with APTMS‐DGEBA sized fibers than those prepared with MTES‐BGEA sized fibers. In each case, an interphase area of around 200 nm width is detected at fibers vicinity. In this area, the elastic modulus is more than 25% lower than the bulk matrix modulus.
科研通智能强力驱动
Strongly Powered by AbleSci AI