材料科学
电解质
快离子导体
纳米纤维
离子电导率
化学工程
电化学窗口
陶瓷
电极
聚合物
电化学
锂(药物)
纳米技术
复合材料
化学
物理化学
内分泌学
工程类
医学
作者
Shicheng Yu,Qi Xu,Xin Lu,Zigeng Liu,Anna Windmüller,Chih‐Long Tsai,Annika Buchheit,Hermann Tempel,Hans Kungl,Hans‐Dieter Wiemhöfer,Rüdiger‐A. Eichel
标识
DOI:10.1021/acsami.1c17718
摘要
The fast Li + transportation of “polymer-in-ceramic” electrolytes is highly dependent on the long-range Li + migration pathways, which are determined by the structure and chemistry of the electrolytes. Besides, Li dendrite growth may be promoted in the soft polymer region due to the inhomogeneous electric field caused by the commonly low Li + transference number of the polymer. Herein, a single-ion-conducting polymer electrolyte is infiltrated into intertwined Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP) nanofibers to construct free-standing electrolyte membranes. The composite electrolyte possesses a large electrochemical window exceeding 5 V, a high ionic conductivity of 0.31 mS cm –1 at ambient temperature, and an extraordinary Li + transference number of 0.94. The hybrid electrolyte in the lithium symmetric cell shows stable Li plating/stripping up to 2000 h under 0.1 mA cm –2 without dendrite formation. The Li|hybrid electrolyte|LiFePO 4 battery exhibits enhanced rate capability up to 1 C and a stable cycling performance with an initial discharge capacity of 131.8 mA h g –1 and a retention capacity of 122.7 mA h g –1 after 500 cycles at 0.5 C at ambient temperature. The improved electrochemical performance is attributed to the synergistic effects of the LATP nanofibers and the single-ion-conducting polymer. The fibrous fast ion conductors provide continuous ion transport channels, and the polymer improves the interfacial contact with the electrodes and helps to suppress the Li dendrites.
科研通智能强力驱动
Strongly Powered by AbleSci AI