[Objective] To evaluate the adsorbent of a lanthanum oxide modified permutite to remove fluoride in water.[Methods]The modified permutite -base adsorbent was prepared by alkaline lanthanum chloride modification with impregnating -drying -roasting method,which was used to remove fluoride through static adsorption test.[Results]Kinetic study revealed that adsorption of fluoride was fast in the initial 40 min and followed pseudo-second-order kinetics.Adsorption isotherm showed that maximum adsorption capacity was approached at very low equilibrium concentration(﹤1.0 mg/L).The equilibrium adsorption data fitted well to Langmuir adsorption isotherm and showing maximum fluoride adsorption capacity of 7.49 mg/g and equilibrium constant of 7.38 L/mg.The removal ratio of fluoride against the water containing F-of 10 mg/L was 91.4% at the dosage of adsorbent was 3 g/L.The pH affected adsorption and the best efficiency was observed at pH 4-5.Co-existing CaCl2 of water and temperature marginally affected fluoride adsorption.[Conclusion]The lanthanum oxide modified permutite adsorbent shows high adsorption capacity and efficiency in fluoride removal.