材料科学
锻造
微观结构
极限抗拉强度
合金
冶金
镁合金
变形(气象学)
复合材料
粒度
延展性(地球科学)
拉伸试验
工作(物理)
材料的强化机理
变形机理
产量(工程)
镁
严重塑性变形
钛合金
压痕硬度
作者
Lianshuang Zhang,Haoran Wu,Zhiyuan Zhu,Pengfei Yue,Yifan Yan,Weiyang Long,Rui Li,Kexing Song
标识
DOI:10.1016/j.jmrt.2026.01.212
摘要
Magnesium alloys are promising biodegradable materials for load-bearing implants, yet their clinical application is hindered by insufficient yield strength. In this study, high-strength Mg-0.2Ca-0.2Ce-4Y alloy bars were fabricated via rotary forging. A pronounced radial gradient microstructure was developed, characterized by refined grains, dense dislocations, and heterogeneous distribution of precipitates, which was attributed to the strain gradient during processing. Consequently, the ultimate tensile strength increased from 188 MPa in the as-cast state to 240 MPa at the center and 298 MPa at the periphery of the forged bar, accompanied by a hardness increase of 15–20 HV. Microstructural analysis revealed that {10-12} tensile twins dominated the deformation structure. Extensive cross-twinning in the late forging stage promoted further grain subdivision and intensified work hardening.
科研通智能强力驱动
Strongly Powered by AbleSci AI