Tribology of GA and GI Steel Sheets in Forming: Coating-Failure Mechanisms, Evaluation Methods, and Governing Factors

电镀 材料科学 涂层 摩擦学 镀锌 磨料 冶金 脆性 微观结构 复合材料 粘着磨损 腐蚀 金属间化合物 磨损 极限抗拉强度 表面完整性 表面工程 失效模式及影响分析 润滑 润滑性 成形性 胶粘剂 工具钢 成形工艺 托拉
作者
Tianqi Liu,Mah-E-Rukh Mustafa,Jia Cui,Ruidi Chen,Xing Wei,Biao Ma,Xianglin Zhang
出处
期刊:Materials [Multidisciplinary Digital Publishing Institute]
卷期号:19 (17): 3683-3683
标识
DOI:10.3390/ma19173683
摘要

This review provides a critical overview of wear and coating failure in galvanized (GI) and galvannealed (GA) steel-sheet forming. Galvanized (GI) and galvannealed (GA) steel sheets are extensively used in automotive sheet-metal forming because they combine corrosion protection with acceptable formability. However, their zinc-based coatings are highly susceptible to friction- and deformation-induced damage during forming operations, which can lead to coating degradation, surface deterioration, galling, unstable production, and accelerated tool wear. Owing to substantial differences in coating microstructure and mechanical response, GI and GA sheets exhibit distinct tribological behaviors and failure modes under comparable forming conditions. GI coatings, characterized by a softer Zn-rich outer layer, are more prone to smearing, adhesion, and galling, whereas GA coatings, composed of brittle Fe-Zn intermetallic phases, are more susceptible to cracking, flaking, powdering, and debris-induced abrasion. This review provides a critical overview of wear and coating failure in GI and GA steel-sheet forming. First, the intrinsic characteristics of GI and GA coatings are compared in terms of microstructure, surface morphology, and mechanical and tribological properties. Second, widely used laboratory methods for friction and wear evaluation are reviewed, including strip-drawing, twist compression, draw-bead, tensile strip, deep-drawing, and U-channel forming tests, with emphasis on the contact conditions and failure mechanisms they can reveal. Third, the dominant damage mechanisms are discussed, including adhesive wear, abrasive wear, coating fracture, material transfer, and galling. Finally, the effects of tool properties, lubrication, forming parameters, and finite-element simulation on coating failure are critically assessed. The available evidence indicates that coating failure in GI and GA sheets is governed by the coupled interaction among coating microstructure, contact pressure, tool-surface condition, lubrication state, and deformation path. However, current studies remain fragmented, and an integrated understanding of coating-damage evolution under industrially relevant forming conditions is still lacking. Future research should therefore focus on coating-specific tribological models, in situ and multiscale characterization, and coupled experimental-numerical strategies for process optimization while preserving coating integrity.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
1秒前
1秒前
lili完成签到,获得积分10
2秒前
Eason发布了新的文献求助10
3秒前
沉默红牛发布了新的文献求助10
3秒前
Link完成签到 ,获得积分10
3秒前
程老六完成签到 ,获得积分10
3秒前
shanguren发布了新的文献求助10
4秒前
TIDUS完成签到,获得积分10
4秒前
4秒前
米酥完成签到,获得积分10
4秒前
5秒前
浮槎发布了新的文献求助30
5秒前
期刊的应助被七月流火采纳,获得10
6秒前
Yuenna完成签到,获得积分20
6秒前
可耐的稀完成签到,获得积分10
6秒前
积极妙菡完成签到 ,获得积分10
7秒前
大迷糊完成签到,获得积分10
8秒前
咔敏完成签到 ,获得积分10
8秒前
peeer完成签到,获得积分10
8秒前
赵晋杰发布了新的文献求助10
8秒前
mm发布了新的文献求助10
9秒前
华仔的应助被罗鑫采纳,获得10
9秒前
lin发布了新的文献求助10
10秒前
10秒前
11秒前
菠菜发布了新的文献求助200
11秒前
mbl2006完成签到 ,获得积分10
11秒前
12秒前
慕青的应助被白白采纳,获得10
12秒前
华安完成签到,获得积分10
12秒前
LT发布了新的文献求助10
12秒前
科研通AI6.4的应助被抗体小王采纳,获得10
12秒前
chenyiyi发布了新的文献求助20
13秒前
顾矜的应助被湛蓝的天空采纳,获得30
13秒前
orixero的应助被成就的沛菡采纳,获得10
14秒前
桃里里完成签到,获得积分10
14秒前
小易完成签到,获得积分10
15秒前
嘴遁老铁叽完成签到,获得积分10
15秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1500
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
Analyses de reconnaissances de dettes passées devant les échevins d'Ypres (1249-1291) 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8161320
求助须知:如何正确求助?哪些是违规求助? 9556074
关于积分的说明 21732157
捐赠科研通 7751456
什么是DOI,文献DOI怎么找? 3427537
关于科研通互助平台的介绍 2552583
邀请新用户注册赠送积分活动 2471992