环氧树脂
复合材料
材料科学
扫描电子显微镜
复合数
X射线光电子能谱
粘附
纤维
动态力学分析
聚合物
化学工程
工程类
作者
Lili Wang,Peng Li,Ling-cong Li,Yunhua Yu,Xiaoping Yang
标识
DOI:10.1177/096739111302100909
摘要
The purpose of this paper is to study the effect of surface properties of domestic sized-T800 carbon fibers on the epoxy/fiber interfacial adhesion by comparing with Toray sized-T800 carbon fibers. Surface chemistry analysis of the fibers was carried out by using X-ray photoelectron spectroscopy (XPS). The surface roughness of the carbon fibers was characterized by scanning electron microscope (SEM) and atomic force microscope (AFM). Dynamic contact angle analysis (DCAA) was selected to characterize the surface energy of the two types of carbon fibers. The interlaminar shear strength (ILSS) test, SEM and Dynamic mechanical thermal analysis (DMTA) were used to study the interface adhesion of the two carbon fiber reinforced epoxy composites. The results show that Toray sized-T800 carbon fiber/epoxy composite has higher interlaminar shear strength than domestic sized-T800/epoxy composite because Toray sized-T800 carbon fibers have more active and rougher surface than the domestic sized-T800 carbon fibers.
科研通智能强力驱动
Strongly Powered by AbleSci AI