材料科学
可穿戴技术
聚二甲基硅氧烷
压力传感器
可扩展性
制作
光电子学
灵敏度(控制系统)
纳米技术
可穿戴计算机
数码产品
机械工程
电子工程
电气工程
计算机科学
工程类
嵌入式系统
病理
数据库
医学
替代医学
作者
Qifeng Du,Lanlan Liu,Ruitao Tang,Jun Ai,Zhijian Wang,Qiqi Fu,Chongxiao Li,Ying Chen,Xue Feng
标识
DOI:10.1002/admt.202100122
摘要
Flexible pressure sensors are attracting considerable attention due to their potential applications in human health monitoring and human‐machine interfaces. However, it is hard to achieve both high sensitivity and wide linear detection range, and the complicated fabrication process restricts their practical applications. Herein, a simple and scalable fabrication process for a flexible pressure sensor with high sensitivity and wide detection range has been developed by combining the silver nanowires coated, laser‐ablated hierarchical microstructured polydimethylsiloxane, and an interdigital electrode. The hierarchical microstructures contribute to the high sensitivity of 4.48 kPa −1 and increase detection range from 0 to 65 kPa. The increase in the contact area and subsequent additional contact sites of the hierarchical microstructures lead to the high‐performance. Arterial pulse, breathing, and static tremors have been measured by attaching the device to the human body. Moreover, a pressure sensor array has been fabricated to illustrate the scalability of this strategy. The results demonstrate that the flexible pressure sensor with simple and scalable fabrication capability has promising applications in wearable electronic skins.
科研通智能强力驱动
Strongly Powered by AbleSci AI