材料科学
复合材料
碳纳米管
纳米复合材料
偷看
制作
空隙(复合材料)
兴奋剂
布基纸
结晶度
色散(光学)
环氧树脂
聚合物
病理
物理
光学
替代医学
医学
光电子学
作者
Shouzheng Sun,Ziang Jin,Xuli Liu,Zhenyu Han,Yang Wang
标识
DOI:10.1016/j.compscitech.2022.109356
摘要
A novel fabrication method based on the automated fiber placement method was used for the development of multiscale thermoplastic nanocomposites to reduce the effect of interlaminar resin-rich zones. We observed that the process optimization method could be effectively used to improve the crystallinity and reduce the void content of composites. However, the method could not be used to effectively reduce the interlaminar resin-rich zone. This resulted in a low extent of improvement in the interlaminar performance. Therefore, carbon nanotube (CNT)-based paper was used to embed to the interlaminar for improving the interlaminar performance. The effect of the distribution of different CNTs in the resin on the interfacial bonding energy and the modification mechanism were analyzed using the molecular dynamics method. Experiments were performed to verify the role of CNTs in the interlayers and quantify the effect of CNT dispersion on the interlaminar performance. The results showed that the interlaminar shear strength could be enhanced by 22.7% when carbon nanopaper was doped into a specific interlayer. We also observed that the dispersion of CNTs significantly affected the interlaminar performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI