异质结
过电位
催化作用
堆积
材料科学
吸附
化学工程
离子键合
沉积(地质)
制作
氧化物
图层(电子)
纳米技术
无机化学
化学
电极
离子
光电子学
物理化学
冶金
电化学
有机化学
古生物学
病理
工程类
生物
医学
替代医学
沉积物
作者
Asako Taniguchi,Yuta Kubota,Nobuhiro Matsushita,Kento Ishii,Thi Kim Ngân Nguyên,Tetsuo Uchikoshi,Yoshikazu Suzuki
标识
DOI:10.1021/acsaem.1c01505
摘要
The use of nanoscale heterostructures is an effective approach for developing catalysts that are free of precious metals for sustainable energy conversion. In this study, a sequenced successive ionic layer adsorption and reaction (sequenced-SILAR) method was developed for the fabrication of Ni(OH) 2 /FeOOH heterostructures. In this method, the order of the deposition cycles of individual Ni(OH) 2 and FeOOH layers was programmed to control the thickness and stacking order of these layers in the heterostructure. The sequenced-SILAR process using an Fe 2+ solution as the iron source produced dense heterojunctions offering overpotentials of 330 and 234 mV at 10 mA cm –2 for an oxygen evolution reaction (OER) on a flat, conducting oxide substrate and porous Ni foam, respectively. Investigation of the deposition-sequence-dependent OER activity indicated that the Ni(OH) 2 /FeOOH coupling effects may extend to the Ni 2+ active sites located about 10 nm from the heterointerface. When an Fe 3+ precursor was employed in the sequenced-SILAR process, dense heterojunctions were not produced because of the formation of isolated FeOOH particles. As a result, an excellent overpotential was not obtained. In principle, the sequenced-SILAR method can be extended to the fabrication of various types of heterostructures. However, the deposition conditions must be carefully designed to offer strong interfacial coupling effects.
科研通智能强力驱动
Strongly Powered by AbleSci AI