清晨好,您是今天最早来到科研通的研友!由于当前在线用户较少,发布求助请尽量完整地填写文献信息,科研通机器人24小时在线,伴您科研之路漫漫前行!

Valorization of waste heat in the food industry: A thermo-economic-environmental analysis of heat recovery technologies in a milk powder factory

作者
Tom Rigter
出处
期刊:Delft University of Technology - Research Repository [Delft University of Technology]
摘要

This study provides suggestions to decrease hot utility use and impact on the environment of a skim milk powder (SMP) processing plant. These suggestions are based on the integration of waste streams with processes in the production of SMP. To identify appropriate waste and process streams, process integration has proven to be a successful method. This concept addresses the issue of waste heat of a process by pointing out to the importance of the relation between unit-processes. In this study, the integration of waste streams is accomplished by heat exchangers, heat pumps and a zeolite wheel. The general assumption underlying this research, is that recovering heat from unused waste streams decreases hot utility use. Multiple methodologies were used in this study. To accomplish process integration, the pinch analysis forms an essential tool. This analysis was used to identify potential heat recovery schemes in the SMP plant. Furthermore, to fully understand these schemes, a thermal, environmental and economical analysis was done. These analyses were based on mass and energy balances, (in)direct CO2 emissions and investment and operational costs. Several conclusion can be drawn from the pinch analysis. First, the pinch temperature is 50◦C. This represents the dividing line between processes which require heating and cooling. Second, the heating and cooling demand is known. The SMP production process requires 6.8 MW of external heating and 1.7 MW of external cooling. Third, the amount of recoverable heat is equal to 5.3 MW. Fourth, appropriate heat sink and sources are identified. The heat sources, i.e. waste streams, are the spray dryer exhaust and the the condensate streams from two evaporators. The supply temperatures of the exhaust and the condensate streams are respectively 77, 65 and 55◦C. The appropriate heat sinks are the spray dryer air inlet and the evaporator product inlet streams. The target temperature of the spray dryer inlet and evaporator inlet streams are respectively 190, 75 and 70◦C. Seven heat recovery setups are proposed. In terms of saved energy, the spray dryer exhaust has the most potential for heat recovery. The zeolite wheel is the best performing heat recovery technology in the spray dryer process, with a recovery of 3.5 MW. Furthermore, a heat exchanger-heat pump combination and a stand-alone heat exchanger recover respectively 1.8 and 1.6 MW. In contrast, the evaporation process has less potential for heat recovery. The best performing configuration is a heat pump, recovering 1.4 MW from the evaporator condensate. The environmental performance is strongly related with the amount of energy saved. This is because the most decisive parameter in the environmental analysis is the carbon intensity of natural gas and electricity. The best performing configurations in terms of saved CO2 emissions are the zeolite wheel (3806 ton/yr), the heat exchanger-heat pump combination (1934 ton/yr) and the stand-alone heat exchanger (1593 ton/yr) in the spray dryer process. In the evaporation section, the heat pump saves 1485 ton CO2 per year. The total annual costs are derived from the equivalent annual costs of the asset, carbon savings and utility savings/costs. The best performing configuration is the heat pump in the evaporation process. This technology has an annual return of 145 ke per year. Other configurations with a high return are the stand-alone heat exchanger (143 ke/yr), the heat exchanger-heat pump combination (128 ke/yr) and the zeolite wheel (123 ke/yr).

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
Khan完成签到,获得积分10
刚刚
5秒前
鲤鱼听荷完成签到 ,获得积分10
6秒前
友好怜菡完成签到,获得积分10
8秒前
zhong完成签到 ,获得积分10
20秒前
西瓜皮先生完成签到 ,获得积分10
26秒前
Aman完成签到,获得积分10
26秒前
久别完成签到,获得积分10
32秒前
33秒前
seeyou14发布了新的文献求助20
40秒前
负责的初柔完成签到 ,获得积分10
44秒前
Aman完成签到,获得积分10
48秒前
心如止水完成签到 ,获得积分10
55秒前
英俊的谷蓝完成签到,获得积分10
57秒前
alei089完成签到 ,获得积分10
59秒前
田田完成签到 ,获得积分10
1分钟前
包子完成签到 ,获得积分10
1分钟前
Aman完成签到,获得积分10
1分钟前
清脆的飞阳完成签到,获得积分10
1分钟前
斯文败类的应助被躺平写文章采纳,获得10
1分钟前
herpes完成签到 ,获得积分0
1分钟前
1分钟前
1分钟前
Zhao完成签到 ,获得积分10
1分钟前
欣欣完成签到,获得积分10
1分钟前
1分钟前
忧伤的傲芙完成签到,获得积分10
1分钟前
小元元完成签到 ,获得积分10
1分钟前
微笑的巧蕊完成签到 ,获得积分10
1分钟前
躺平写文章完成签到,获得积分10
1分钟前
专注湘完成签到,获得积分10
1分钟前
Cosmosurfer完成签到,获得积分0
2分钟前
眯眯眼的安雁完成签到 ,获得积分10
2分钟前
害羞雪珊完成签到,获得积分10
2分钟前
温柔樱桃完成签到 ,获得积分10
2分钟前
满意的伊完成签到,获得积分10
2分钟前
魔幻的松思完成签到,获得积分10
2分钟前
飞哥与小佛完成签到,获得积分10
2分钟前
2分钟前
Julian完成签到,获得积分0
2分钟前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8185483
求助须知:如何正确求助?哪些是违规求助? 9574168
关于积分的说明 21834498
捐赠科研通 7783085
什么是DOI,文献DOI怎么找? 3434576
关于科研通互助平台的介绍 2558929
邀请新用户注册赠送积分活动 2481346