Sensitive and Stable Tin–Lead Hybrid Perovskite Photodetectors Enabled by Double‐Sided Surface Passivation for Infrared Upconversion Detection

Abstract Tin(Sn)‐based perovskite is currently considered one of the most promising materials due to extending the absorption spectrum and reducing the use of lead (Pb). However, Sn2+ is easily oxidized to Sn4+ in atmosphere, causing more defects and degradation of perovskite materials. Herein, double‐sided interface engineering is proposed, that is, Sn‐Pb perovskite films are sandwiched between the phenethylammonium iodide (PEAI) in both the bottom and top sides. The larger organic cations of PEA+ are arranged into a perovskite surface lattice to form a 2D capping layer, which can effectively prevent the water and oxygen to destroy bulk perovskite. Meanwhile, the PEA+ can also passivate defects of iodide anions at the bottom of perovskite films, which is always present but rarely considered previously. Compared to one sided passivation, Sn‐Pb hybrid perovskite photodetectors contribute a significant enhancement of performance and stability, yielding a broadband response of 300–1050 nm, a low dark current density of 1.25 × 10–3 mA cm–2 at –0.1 V, fast response speed of 35 ns, and stability beyond 240 h. Furthermore, the Sn‐Pb broadband photodetectors are integrated in an infrared up‐conversion system, converting near‐infrared light into visible light. It is believed that a double‐sided passivation method can provide new strategies to achieving high‐performance perovskite photodetectors.