热解
催化作用
生物量(生态学)
制氢
氢
化学工程
废物管理
材料科学
生产(经济)
生物质气化
化学
制浆造纸工业
有机化学
农学
工程类
生物
经济
宏观经济学
作者
Shogo Kumagai,Jon Alvarez,Paula H. Blanco,Chunfei Wu,Martin Olazar
标识
DOI:10.1016/j.jaap.2014.09.012
摘要
A Ni-Mg-Al-Ca catalyst was prepared by a co-precipitation method for hydrogen production from polymeric materials. The prepared catalyst was designed for both the steam cracking of hydrocarbons and for the in situ absorption of CO2 via enhancement of the water-gas shift reaction. The influence of Ca content in the catalyst and catalyst calcination temperature in relation to the pyrolysis-gasification of a wood sawdust/polypropylene mixture was investigated. The highest hydrogen yield of 39.6molH2/g Ni with H2/CO ratio of 1.90 was obtained in the presence of the Ca containing catalyst of molar ratio Ni:Mg:Al:Ca=1:1:1:4, calcined at 500°C. In addition, thermogravimetric and morphology analyses of the reacted catalysts revealed that Ca introduction into the Ni-Mg-Al catalyst prevented the deposition of filamentous carbon on the catalyst surface. Furthermore, all metals were well dispersed in the catalyst after the pyrolysis-gasification process with 20-30nm of NiO sized particles observed after the gasification without significant aggregation.
科研通智能强力驱动
Strongly Powered by AbleSci AI