蒸发器
气体压缩机
热力学
热交换器
火用
热膨胀阀
制冷
跨临界循环
涡流管
工作(物理)
热泵与制冷循环
节气门
总压比
机械
核工程
制冷剂
工程类
涡流
物理
作者
Omprakash Patil,Shrikant A Shet,Manish Jadhao,Neeraj Agrawal
标识
DOI:10.1093/ijlct/ctaa042
摘要
Abstract Thermodynamic analysis including energetic and exergetic analysis is carried out employing Engineering Equation Solver for the five modified cycles: dual expansion cycle, internal heat exchanger cycle, work recovery cycle, work recovery with internal heat exchanger cycle and vortex tube expansion cycle. Contours are developed to study the effect of gas cooler temperatures and evaporator temperatures on the system performance and optimum gas cooler pressure. The modified cycle with work recovery turbine offers relatively higher COP and higher exergetic efficiency with lower compressor discharge pressure. The exergy loss in compressor, gas cooler, throttle valve and vortex tube (VT) are considerably higher than that in internal heat exchanger (IHX), evaporator and turbine. It is observed that COP of modified cycle with VT is slightly less than that with IHX, whereas the cycle with work recovery turbine brings the highest COP with the improvement of 25% at the gas cooler exit temperature of 305 K and evaporator temperature of 248 K.
科研通智能强力驱动
Strongly Powered by AbleSci AI