振动
涡轮机
结构工程
材料科学
模态分析
工程类
机械工程
有限元法
物理
声学
作者
Yue Bi,Hao Dong,Sheng-Sheng Liu,Dai-Ning Zhao,Hao Han,Dong-Bo Zhang,Xiangying Hou,Guanghu Jin
标识
DOI:10.1080/15397734.2025.2516153
摘要
The gear components are among the core fundamental parts of wind turbine gearboxes, and their operating condition significantly affects the performance of the gearbox transmission chain and even the entire wind turbine. This article derives the calculation method for the time-varying mesh stiffness (TVMS) of cracked herringbone gears based on the slice method. Additionally, a dynamic model with multiple degrees of freedom, considering factors such as relief grooves and errors, is established for the cracked herringbone gear planetary system (HGPS) with a bending-torsion-axis pendulum (BTAP) based on the lumped parameter method. The vibration curves of the system with varying cracks are obtained by solving the model using the Runge–Kutta method. Furthermore, a test rig is set up, and vibration tests are conducted. The results show that when cracks appear in the sun gear, the TVMS of the meshing pairs, both inside and outside the system, decreases. As the crack worsens, the fluctuation of the TVMS diminishes. Cracks induce periodic impact behaviors in the system, with an impact time of the fault cycle of T = 0.012 s. Significant sidebands appear near the mesh harmonic frequency, fm = 750 Hz, and the vibration trajectory of the gear becomes chaotic. As the cracks intensify, the vibration of the system becomes more pronounced. Experimental results are consistent with the theoretical results, verifying the accuracy of the established model and the feasibility of the simulation.
科研通智能强力驱动
Strongly Powered by AbleSci AI