Research on fatigue damage correction coefficient of main truss members of railway suspension bridges

Steel truss girder suspension bridges are gradually applied to long-span railway bridges. The fatigue damage correction factor is an important parameter for fatigue calculation, however the research on the coefficient is limited to small-span bridges. This paper analyzes force characteristics of main truss members, calculates the fatigue damage correction coefficient of truss members, and studies the influences of train loading length, annual traffic level of fatigue damage correction coefficient. The main conclusions are as follows: (1) The influence line and fatigue stress characteristics of the main truss members were studied; the stress range of members under tension or mainly under tension is analyzed, and the stress ranges and ratios between dead and live loads in main truss members are investigated. The results show that the maximum stress range of the bottom chord is 182 MPa, the ratios of dead to live loads of about 90 % of bottom chords and diagonal web members exceed the current specifications, and stress ratios of about 10 % of bottom chords and diagonal web members exceed the current specifications. (2) The fatigue damage correction coefficients of main truss members under different train loading lengths and annual traffic levels are calculated and recommended. The research results provide a basis for updating and supplementing the railway steel bridge code.