作者
Yunah Ahn,Yewon Kim,Dae‐Hyun Kim,John Hong
摘要
Zinc powder has attracted attention as a promising anode material for aqueous zinc-ion batteries (AZIBs) due to its excellent tunability and scalability. However, its practical application is limited by poor cycling stability, primarily caused by nonuniform reactions during repeated Zn plating and stripping processes. To address this issue, the binder plays a crucial role in maintaining the structural integrity of the anode components throughout cycling. Despite its importance, the influence of binder chemistry on electrochemical performance in ZIBs remains underexplored. In this study, we investigate the effects of two representative binders—polyvinylidene fluoride (PVDF) and the eco-friendly carboxymethyl cellulose sodium (CMC)—on the electrochemical behavior, cycling performance, and structural stability of AZIB anodes. PVDF, a conventional binder widely used in ZIBs, suffers from weak adhesion, requires the use of toxic organic solvent N-methyl-2-pyrrolidone (NMP), and exhibits poor electrolyte wettability, leading to delayed activation and capacity loss during early cycles. Additionally, its fluorinated polymer structure raises environmental concerns, limiting its suitability for next-generation sustainable energy storage systems. To overcome these limitations, we applied CMC as a hydrophilic and environmentally benign binder for the Zn anode. CMC provides strong adhesion and contains carboxylate functional groups that interact with Zn 2+ ions, promoting uniform Zn deposition. However, when used alone, CMC is susceptible to dissolution in aqueous electrolytes, compromising structural stability. To mitigate this, a crosslinked hydrophilic binder was introduced. The crosslinked binder simultaneously offers hydrophilicity, mechanical robustness, and environmental compatibility. As a result, the electrodes maintained structural integrity even under high mass loading and exhibited enhanced electrochemical performance. This study highlights the significance of binder design incorporating functional groups capable of regulating interfacial reactions in ZIBs. We present a simple and effective strategy for fabricating long-life, high-loading Zn powder anodes, thereby contributing a foundational approach toward the commercialization of zinc-based energy storage systems. These findings underscore the potential of cost-effective, stable, and eco-friendly energy storage technologies.