吸附
热液循环
解吸
吸附
材料科学
多孔性
化学工程
化学
复合材料
有机化学
工程类
作者
Wacław Makowski,Patrycja Gryta,Gabriela Jajko,Monika Cieślik-Górna,Aleksandra Korzeniowska
出处
期刊:Molecules
[Multidisciplinary Digital Publishing Institute]
日期:2024-11-28
卷期号:29 (23): 5625-5625
被引量:8
标识
DOI:10.3390/molecules29235625
摘要
A novel experimental technique, quasi-equilibrated temperature-programmed desorption and adsorption (QE-TPDA), was used to study the water sorption properties and hydrothermal stability of aluminum trimesate MIL-96 and aluminum isophthalate CAU-10, which have been selected due to their remarkable sorption properties. The QE-TPDA profiles of water observed for MIL-96 and CAU-10 confirmed the hydrophilic nature of these materials. Complex QE-TPDA profiles indicate that water sorption in MIL-96 follows a three-step pore filling mechanism. The shape of single desorption peaks in the QE-TPDA profiles for CAU-10 confirms that water sorption involves a reversible phase transition. Based on the QE-TPDA profiles, the water adsorption heat was determined: 45-46 kJ/mol for CAU-10 and 43-56 kJ/mol for MIL-96, in the latter case depending on the adsorption extent. Hydrothermal stability tests revealed that MIL-96 retained its stable porosity-related sorption capacity for water after hydrothermal treatment up to 290 °C. Gradual changes in the QE-TPDA profiles due to the hydrothermal treatment above 290 °C, with decreasing the high-temperature desorption peak and increasing the low-temperature one, indicate minor structural changes occurring in this material. Only after 410 °C treatment was fast degradation of MIL-96 observed. CAU-10 exhibited high and unchanged hydrothermal stability up to 400 °C.
科研通智能强力驱动
Strongly Powered by AbleSci AI