Microcontact printing of lectin self‐assembled monolayers for arbovirus detection

Abstract Arboviruses significantly burden public health in Brazil, constituting a constant challenge for health authorities. The diagnosis and, consequently, clinical management and the reporting of arbovirus infections in regions where multiple arboviruses coexist are complex processes. Herein, we report the development of a new electrochemical biosensor based on Concanavalin A (ConA) to identify carbohydrate patterns in the viral structure of Dengue 3 (DENV‐3), Zika (ZIKV) and Chikungunya (CHIKV) viruses. The biorecognition of arboviruses was carried out through functionalization with 4‐aminophenylacetic acid (CMA) on poly (ethylene terephthalate) (PET) substrate coated with a gold layer combining microcontact printing (μCP). Bovine serum albumin (BSA) was used after ConA immobilization to block binding to nonspecific sites. Subsequently, the interaction between ConA and arbovirus was characterized by standard atomic force microscopy (AFM), fluorescence microscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). Fluorescent imaging was conducted to confirm the occurrence of the DENV‐3, ZIKV, and CHIKV detection processes. The obtained results demonstrated the success of the biosensor (CMA‐ConA‐BSA) manufactured on a PET substrate using μCP for detecting medically significant arboviruses. RCT values showed an increase in impedimetric response total of the system after exposition to DENV‐3 (RCT = 68.82 kΩ) and a lower recognition to CHIKV (RCT = 44.44 kΩ). The present biosensor platform reveals the applicability of the ConA lectin in the viral biorecognition process based on flexible biosensors for differential detection of DENV‐3, ZIKV, and CHIKV. ConA‐based electrochemical biosensor provide high selectivity, real‐time detection, and low volumes of analytes.