盘式制动器
有限元法
振动
非线性系统
制动器
热弹性阻尼
噪音(视频)
结构工程
控制理论(社会学)
理论(学习稳定性)
分叉
压力(语言学)
工程类
材料科学
消散
机械
拓扑优化
发热
热的
机械工程
还原(数学)
优化设计
动态制动
材料性能
计算机模拟
作者
Lin Zheng,Liguo Chen,Yuan Shengkui,Zhen Tian,Li Feng
标识
DOI:10.3389/fmech.2026.1853097
摘要
Introduction To address the complex nonlinear dynamics and noise issues caused by frictional excitation during the braking process of disc brakes, this paper conducts systematic modeling, simulation, and structural optimization studies. Methods First, a six-degree-of-freedom nonlinear dynamic model considering velocity-dependent characteristics was established, utilizing the Stribeck friction model to describe interface evolution. Subsequently, a thermo-structural coupled finite element analysis was performed in Abaqus to reveal the influence laws of braking pressure and speed on the temperature and stress fields. Finally, a topology optimization method was introduced to iteratively design the brake disc structure with the objective of minimizing strain energy. Results Dynamic simulations revealed the bifurcation and stability characteristics of the system under different operating conditions. Finite element results indicated that braking pressure is the key factor inducing random vibrations, and verified the excellent thermal stability of carbon fiber composites. The optimized structure, while maintaining mechanical strength, significantly reduced the maximum temperature under 6000 N pressure from 132.7 °C to 118 °C, and achieved a 10% reduction in volume. Discussion The results demonstrate that braking pressure is the dominant factor governing system stability by modulating contact nonlinearity and negative damping, whereas vehicle speed primarily amplifies vibration intensity through thermoelastic instability. The topologically optimized structure effectively increases the air contact area and heat dissipation capacity. These findings provide a robust theoretical foundation for vibration suppression and structural improvement in braking systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI