The influence of hard segment content on mechanical and thermal properties of polycarbonate-based polyurethane materials

作者
Jelena Pavličević,Miléna Špírková,Jaroslava Budìnski‐Simendìć,Mirjana C. Jovičić,Oskar J. Bera,Ivan Ristić
出处
期刊:Hemijska Industrija [Association of Chemical Engineers of Serbia]
卷期号:66 (6): 853-862 被引量:3
标识
DOI:10.2298/hemind111208017s
摘要

Aliphatic segmented polyurethanes were prepared by one-step procedure in catalytic reaction between polycarbonate diol, hexamethylene-diisocyanate and 1,4-butandiol (as chain extender). The hard segment content TS was varied (17, 24, 30 and 42 wt. %) by changing the ratio of starting compounds. The soft segment is made from flexible aliphatic polycarbonate diol, while hard segments consist of chain extender and diisocyanate component. In order to study the hydrogen bonding formation and phase separation, Fourier transform infrared spectroscopy (FT-IR) was used. Wide angle X-ray scattering (WAXS) was performed to determine a degree of crystallinity and to investigate the phase behavior of prepared elastomers. The effect of TS content on mechanical properties (tensile strength, elongation at break and hardness) was tested. Thermal behavior of prepared novel polycarbonate-based polyurethanes was investigated using differential scanning callorimetry (DSC). It was determined that the elastomer which contains the highest amount of urethane groups in its structure (TS content of 42 wt. %) exhibits the most pronounced phase separation and the highest degree of crystallinity. All prepared polyurethanes exhibit high elongation at break (over 700%). The glass transition temperature Tg of prepared samples was in the temperature region from ?39 to ?36?C, and it was found to be slightly influenced by the soft segment content. The enthalpy of chain segments relaxation in diffused region between hard and soft domains (detected in the temperature range from 35 to 55 ?C) was decreased with the increase of hard segment content. The multiple melting of hard segments (connected with the dissruption of physical crosslinks) appeared above 100 ?C. It was found that the melting enthalpy linearly increases with the increase of urethane group content. Sample with 42 wt. % of TS has the highest value of melting enthalpy (41.5 J/g).

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
fossick2010完成签到 ,获得积分10
2秒前
yyyrrr发布了新的文献求助10
3秒前
3秒前
4秒前
rrrachel发布了新的文献求助10
4秒前
乔治韦斯莱完成签到 ,获得积分10
5秒前
shen的应助被研友_8WdzPL采纳,获得10
5秒前
Orange的应助被HMMM采纳,获得10
5秒前
aw完成签到,获得积分10
5秒前
嘻嘻发布了新的文献求助10
5秒前
呜呜呜完成签到,获得积分10
6秒前
巴塞罗那小铁匠完成签到,获得积分10
7秒前
呵呵关注了科研通微信公众号
7秒前
紫苏完成签到 ,获得积分10
7秒前
十五发布了新的文献求助10
8秒前
8秒前
cllk完成签到,获得积分10
8秒前
8秒前
11秒前
12秒前
12秒前
吱ing完成签到 ,获得积分10
13秒前
心灵美的南霜完成签到,获得积分10
13秒前
AAA完成签到,获得积分20
14秒前
15秒前
丘比特的应助被狂野故事采纳,获得10
15秒前
swslgd发布了新的文献求助10
17秒前
17秒前
大个的应助被lijun采纳,获得10
17秒前
18秒前
kbyang发布了新的文献求助10
19秒前
小林发布了新的文献求助10
19秒前
dip完成签到 ,获得积分10
20秒前
田様的应助被黄药师采纳,获得10
20秒前
Owen的应助被嘻嘻采纳,获得10
20秒前
女巫在跳舞完成签到,获得积分10
21秒前
21秒前
tt发布了新的文献求助10
21秒前
23秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
Energie-Contracting 1500
Spec 401: Standards for Jet Fuel Facility and Equipment Commissioning and Flushing at Airports, 2026.1 (Original Issue) 1000
Spec 103: Standard for Jet Fuel Quality Control at Airports, Revision 2026.1 1000
Mathematical models in hydrology 1000
Klimaschutzrecht durch den Energiesektor im Mehrebenensystem – Ein Rechtsvergleich 1000
Erzählte Gnade 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8086385
求助须知:如何正确求助?哪些是违规求助? 9500379
关于积分的说明 21418242
捐赠科研通 7654991
什么是DOI,文献DOI怎么找? 3403145
关于科研通互助平台的介绍 2532154
邀请新用户注册赠送积分活动 2441723