煅烧
材料科学
相(物质)
微观结构
分析化学(期刊)
冶金
矿物学
热电偶
陶瓷
四方晶系
结构精修
热的
方石英
单相
碳化作用
X射线光电子能谱
差热分析
X射线晶体学
马弗炉
管式炉
作者
Mahmoud S. Alkathy,Pérson P. Neves,Anibal Thiago Bezerra,Gabriel Monteiro A. da Rocha,Leandro Sanches,Jose Antonio Eiras
出处
期刊:ACS omega
[American Chemical Society]
日期:2026-09-23
卷期号:11 (39): 59210-59225
标识
DOI:10.1021/acsomega.6c04998
摘要
Abstract In ceramic synthesis, the thermal history actually experienced by a powder may differ substantially from the programmed furnace schedule, with direct consequences for phase formation and reproducibility. This study shows that identical nominal calcination schedules can produce different BaTiO3 reaction outcomes when applied in different furnaces. A single high-energy ball-milled precursor batch was divided into three portions and calcined at 1200 °C for 8 h using the same programmed heating and cooling rates. XRD and Rietveld refinement identified tetragonal BaTiO3 (P4mm) as the dominant phase in all samples. However, the powder treated in Furnace 1 showed weak Ba-rich secondary phases, smaller crystallites, higher microstrain, and poorer refinement statistics, whereas samples from Furnaces 2 and 3 were phase-pure within the XRD detection limit and exhibited larger, less strained crystallites. Direct thermocouple measurements revealed the origin of these differences. Furnaces 2 and 3 closely maintained the programmed 1200 °C set point, while the sample position in Furnace 1 reached only approximately 1028 °C. SEM revealed a finer, more compact microstructure for Furnace 1 and coarser, more heterogeneous grains for Furnaces 2 and 3. EDS mapping confirmed homogeneous Ba, Ti, and O distributions in all powders, although quantitative EDS indicated a higher Ba/Ti ratio in the Furnace 1 sample. XPS showed comparable BaTiO3-type surface chemical environments and modest surface carbonation for all samples. These results establish furnace identity and actual temperature distribution as critical processing variables that should be monitored and explicitly reported in reproducibility-sensitive BaTiO3 and ceramic-synthesis studies.
科研通智能强力驱动
Strongly Powered by AbleSci AI