混溶性
混合(物理)
提高采收率
化学
表面张力
化学工程
烷基
热力学
材料科学
组分(热力学)
相(物质)
分子动力学
乙醚
机制(生物学)
石油工程
旋节分解
链条(单位)
原油
烷烃
相图
碳氢化合物
作者
Xue Cheng Gao,Zhe Sun,Jinpeng Liu,Fei Feng,Xiaoqing Lü,Bo Liao,Siyuan Liu
出处
期刊:Langmuir
[American Chemical Society]
日期:2025-10-20
卷期号:41 (42): 28845-28856
标识
DOI:10.1021/acs.langmuir.5c04362
摘要
The high miscibility of oil with CO 2 significantly enhances its mobility and thus improves oil recovery efficiency during CO 2 flooding. Many factors have strong influence on miscibility, including the chain length of oil, the component of injected gas, reservoir conditions, etc. Despite their critical role, the mechanisms underlying these influences remain poorly understood due to challenges in analyzing pore-scale mixing dynamics. Therefore, the molecular dynamics method was employed, and mixed gas–surfactant–mixed oil models were established to investigate the influence of different factors on the miscibility behavior during the multicomponent gas flooding process. Nonionic CO 2 friendly polyoxypropylene alkyl ether (POP) was chosen as a surfactant, and its influence on interfacial tension was also explored. The research results indicate a strong hindering effect of long-chain alkanes toward CO 2 –oil miscibility. When its content is reduced to less than 30%, the hindering effect started to diminish. As for the gas component, less than 15% N 2 is beneficial for the movement of CO 2 and accelerates the miscibility process. In addition, as the chain length of POP increases, its ability to improve the miscibility of CO 2 and oil first increases and then decreases. The results also indicate that an optimized structure of POP with 8 PO groups has the highest ability to assist the CO 2 –oil mixing process. Compared to the system without POP, the IFT can be reduced by approximately 46.78%. The simulation results can provide useful guidance for enhancing oil recovery in deep, low-permeability, and tight reservoirs.
科研通智能强力驱动
Strongly Powered by AbleSci AI