钝化
材料科学
结晶度
钙钛矿(结构)
晶界
能量转换效率
化学工程
X射线光电子能谱
结晶
光致发光
衍射仪
扫描电子显微镜
离子
光电子学
电流密度
表面粗糙度
光伏
表面光电压
分析化学(期刊)
Crystal(编程语言)
载流子寿命
晶体生长
钙钛矿太阳能电池
太阳能电池
纳米技术
量子产额
量子效率
作者
Min Li,Zhaodong Peng,Xin Jian Yao,Jie Huang,Dawei Zhang
出处
期刊:Nanomaterials
[Multidisciplinary Digital Publishing Institute]
日期:2025-10-21
卷期号:15 (20): 1602-1602
被引量:5
摘要
Wide-bandgap (WBG) perovskite solar cells (PSCs) are critical for high-efficiency tandem photovoltaic devices, but their practical application is severely limited by phase separation and poor film quality. To address these challenges, this study proposes a dual-additive passivation strategy using potassium thiocyanate (KSCN) and potassium chloride (KCl) to synergistically optimize the crystallinity and defect state of WBG perovskite films. The selection of KSCN/KCl is based on their complementary functionalities: K+ ions occupy lattice vacancies to suppress ion migration, Cl− ions promote oriented crystal growth, and SCN− ions passivate surface defects via Lewis acid-base interactions. A series of KSCN/KCl concentrations (relative to Pb) were tested, and the effects of dual additives on film properties and device performance were systematically characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL), space-charge-limited current (SCLC), current-voltage (J-V), and external quantum efficiency (EQE) measurements. Results show that the dual additives significantly enhance film crystallinity (average grain size increased by 27.0% vs. control), reduce surface roughness (from 86.50 nm to 24.06 nm), and passivate defects-suppressing non-radiative recombination and increasing electrical conductivity. For WBG PSCs, the champion device with KSCN (0.5 mol%) + KCl (1 mol%) exhibits a power conversion efficiency (PCE) of 16.85%, representing a 19.4% improvement over the control (14.11%), along with enhanced open-circuit voltage (Voc: +2.8%), short-circuit current density (Jsc: +6.7%), and fill factor (FF: +8.9%). Maximum power point (MPP) tracking confirms superior operational stability under illumination. This dual-inorganic-additive strategy provides a generalizable approach for the rational design of stable, high-efficiency WBG perovskite films.
科研通智能强力驱动
Strongly Powered by AbleSci AI