气凝胶
保温
纤维素
吸附
复合材料
材料科学
热的
化学工程
高分子科学
化学
有机化学
工程类
图层(电子)
物理
气象学
作者
Xiaoyang Yi,Zhongxu Zhang,Junfeng Niu,Hongyan Wang,Tiankun Li,Junjie Gong,Rongbo Zheng
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2024-05-01
卷期号:16 (9): 1260-1260
被引量:15
标识
DOI:10.3390/polym16091260
摘要
Cellulose-based aerogel has attracted considerable attention for its excellent adsorption capacity, biodegradability, and renewability. However, it is considered eco-unfriendly due to defibrillation of agriculture waste and requires harmful/expensive chemical agents. In this study, cornstalk rind-based aerogel was obtained via the following steps: green H2O2/HAc delignification of cornstalk rind to obtain cellulose fibers, binding with carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) and freeze-drying treatment, and hydrophobic modification with stearic acid. The obtained aerogel showed high compressive strength (200 KPa), which is apparently higher (about 32 kPa) than NaClO-delignified cornstalk-based cellulose/PVA aerogel. Characterization of the obtained aerogel through SEM, water contact angle, etc., showed high porosity (95%), low density (0.0198 g/cm−3), and hydrophobicity (water contact angle, 159°), resulting in excellent n-hexane adsorption capacity (35 g/g), higher (about 29.5 g/g) than NaClO-delignified cornstalk-based cellulose/PVA aerogel. The adsorbed oil was recovered by the extrusion method, and the aerogel showed excellent recyclability in oil adsorption.
科研通智能强力驱动
Strongly Powered by AbleSci AI