Influence of Microstructure and Heat Transfer Surface on the Thermal Power of Cast Iron Heat Exchangers

The paper presents the results of calorimetric tests of segment elements of fireplace inserts.The aim of the work was to optimize their thermal power by replacing the previously used gray cast iron with flake graphite with gray iron with vermicular graphite and replacing the existing geometry of the heat transfer surface with a more developed one.It turned out that the thermal power of the test segments made of cast iron with vermicular graphite was higher compared to the segments of the same shape made of gray cast iron with flake graphite.It was found that the use of segments made of vermicular cast iron with a ferritic matrix allowed for an increase in the thermal power value by dozen percent, compared to segments of the same shape made of vermicular cast iron with a pearlitic matrix.The test results showed that the thermal power of the test segments depends on the variant of the development of both the heat receiving surface and the heat giving off surface.The highest value of the thermal power was obtained when ribbing in the form of a lattice was used on both of these surfaces, and the lowest when using flat surfaces.