Constructing Stable Solid Electrolyte Interphase Using Gel Polymer Electrolytes for Anode-Free Lithium Metal Batteries with Enhanced Cycle Life

Anode-free lithium metal batteries (AFLMBs) have recently emerged as next-generation batteries due to high energy density, reduced cost, and simplified manufacturing process due to the absence of reactive metallic lithium. However, developing high-performance AFLMBs faces several challenges for practical applications, such as low coulombic efficiency and poor cyclability, due to the dendrite growth of lithium and side reactions of lithium with liquid electrolytes. To develop the AFLMBs with long cycle life, it is necessary to attain high coulombic efficiency since there is no excessive lithium to compensate for irreversible Li inventory losses in the AFLMB. Three-dimensional cross-linked gel polymer electrolyte (GPE) can be a good candidate for stabilizing the lithium metal by encapsulating organic solvents in the polymer matrix, leading to reduction of the parasitic reactions between lithium metal and liquid electrolyte, which results in high coulombic efficiency of AFLMBs. In this work, we prepared a cross-linked GPE using a multi-functional cross-linking agent to realize high coulombic efficiency and long cycle life of AFLMBs with LiNi x Co y Al 1-x-y O 2 (NCA) cathode (areal capacity of 4.76 mAh cm -2 ). Moreover, the GPE capable of coordinating with lithium ions could construct stable solid electrolyte interphase by regulating lithium ion solvation structures. Cycling performance was investigated in the voltage range of 3.6 – 4.3 V at 0.5 C rate. The Cu/GPE/NCA cell exhibited a capacity retention of 80% after 150 cycles, which was higher than that of AFLMB with liquid electrolyte. Electrochemical characterization and spectrometry were performed to investigate how the GPE could improve the cycling performance of AFLMBs.