增容
乙醇酸
材料科学
聚酯纤维
韧性
极限抗拉强度
扩展器
生物降解
聚己内酯
水解降解
环氧树脂
复合材料
PLGA公司
傅里叶变换红外光谱
聚合物混合物
化学工程
共聚物
聚合物
化学
有机化学
乳酸
聚氨酯
纳米技术
细菌
纳米颗粒
工程类
生物
遗传学
作者
Han Wu,Chunyu Wang,Zhenbo Ning,Ni Jiang,Zhihua Gan
标识
DOI:10.1016/j.eurpolymj.2022.111661
摘要
• Biodegradable poly(glycolic acid)-based materials were prepared by reactive blending. • In situ formed copolymers enhanced the miscibility of PGA and PCL. • Under the cooperation of PCL and CE, the toughness of PGA was significantly improved. • The hydrolysis rate of matrix could be controlled by the content and dispersion of PCL. In view of the increasingly serious environmental pollution problems and the implementation of the international plastic restriction order, the development and modification of biodegradable plastics are imminent. As a promising biodegradable polyester, the production scale of poly(glycolic acid) (PGA) has gradually expanded, but its application is dramatically limited by its inherent brittleness and rapid degradation. In this work, the effects of flexible hydrophobic poly( ε -caprolactone) (PCL) and multi-epoxy chain extender (CE) on the properties of PGA were investigated. 1 H NMR and FTIR results demonstrated that CE mediated the copolymerization of PGA and PCL during the blending process. The in situ formed copolymer PGA- g -CE- g -PCL greatly improved the two-phase compatibility, thereby significantly enhanced the toughness of PGA. The tensile testing results showed that the elongation at break of PGA increased even more than 2400% after adding 10 wt% PCL and 1 wt% CE. At the same time, the uniform distribution of PCL dramatically reduced the hydrolysis rate of PGA. This work provides an effective way for the modification of PGA, which has potential application prospects in the fields of medical devices and food packaging.
科研通智能强力驱动
Strongly Powered by AbleSci AI