DIRECT VISUAL INSTILLATION AS A METHOD FOR EFFICIENT DELIVERY OF FLUID INTO THE DISTAL AIRSPACES OF ANESTHETIZED MICE

Although several methods have been used to deliver fluid into the distal airspaces of the lung, the efficiency of these methods has been variable. Therefore, the authors have modified prior techniques to design a better method for direct visual instillation (DVI) of fluid into the trachea and compared its efficiency with two commonly used methods: nasal inhalation and invasive intratracheal instillation (delivery of the instillate by needle puncture of the trachea). The results showed that this method (DVI) can deliver fluid efficiently into either both lungs or into a single lung. Using an 131I-albumin labeling technique, DVI resulted in 92 ± 1% retention of the labeled albumin in the lungs 1 hour after instillation, significantly greater than nasal inhalation (48 ± 3%, P < .01) and invasive intratracheal instillation (77 ± 3%, P < .05). Also, when bacteria (Escherichia coli) were instilled with the DVI method, the severity of gram-negative pneumonia was greater (6.5 ± 0.5 g water/g dry weight) compared to delivery by nasal inhalation (5.5 ± 0.4 g water/g dry weight, P < .05) or by invasive intratracheal instillation (5.9 ± 0.4 g water/g dry weight, P < .05). The authors conclude that DVI is more efficient than nasal inhalation and invasive intratracheal instillation for delivering experimental fluids into the distal airspaces of anesthetized mice. This method should be valuable for experimental lung studies in mice.