材料科学
结晶
钙钛矿(结构)
能量转换效率
化学工程
热稳定性
相对湿度
粒度
钙钛矿太阳能电池
复合材料
光电子学
热力学
物理
工程类
作者
Xian Hou,Sumei Huang,Wei Ou‐Yang,Likun Pan,Zhuo Sun,Xiaohong Chen
标识
DOI:10.1021/acsami.7b08488
摘要
A high-quality perovskite film with interconnected perovskite grains was obtained by incorporating terephthalic acid (TPA) additive into the perovskite precursor solution. The presence of TPA changed the crystallization kinetics of the perovskite film and promoted lateral growth of grains in the vicinity of crystal boundaries. As a result, sheet-shaped perovskite was formed and covered onto the bottom grains, which made some adjacent grains partly merge together to form grains-interconnected perovskite film. Perovskite solar cells (PSCs) with TPA additive exhibited a power conversion efficiency (PCE) of 18.51% with less hysteresis, which is obviously higher than that of pristine cells (15.53%). PSCs without and with TPA additive retain 18 and 51% of the initial PCE value, respectively, aging for 35 days exposed to relative humidity 30% in air without encapsulation. Furthermore, MAPbI3 film with TPA additive shows superior thermal stability to the pristine one under 100 °C baking. The results indicate that the presence of TPA in perovskite film can greatly improve the performance of PSCs as well as their moisture resistance and thermal stability.
科研通智能强力驱动
Strongly Powered by AbleSci AI