Temporal and spatial variations of disinfection by-products in South Taihu's drinking water, Zhejiang Province, China

Some disinfection by-products (DBPs) in drinking water present a potential safety concern. This study focuses on the elements influencing DBPs formation. A total of 120 water samples were collected from 10 different drinking water facilities spanning 5 counties within Huzhou, Zhejiang Province, China. Concentrations of trihalomethanes (THMs) and haloacetic acids (HAAs) were observed to be 14.5 and 27.4 μg/L, respectively, constituting 34 and 64% of the total DBPs. Seasonal fluctuations demonstrated that HAAs, THMs, halonitromethanes (HNMs), and haloacetonitriles (HANs) followed a similar pattern with higher levels in summer or autumn compared to spring. Importantly, the concentrations of HAAs and THMs were markedly higher in Taihu-sourced water compared to other sources. Geographically, Nanxun exhibited the highest levels of total DBPs, HAAs, and THMs, while Deqing and Changxing demonstrated significantly lower levels. Correlation studies between water quality parameters and DBPs revealed that factors such as chloride content, temperature, and residual chlorine positively influenced DBPs formation, whereas turbidity negatively affected it. Principal component analysis suggested similar formation processes for HANs, haloketones (HKs), HNMs, and THMs. Factors such as temperature, chemical oxygen demand (COD), and residual chlorine were identified as significant contributors to the prevalence of HAAs.