Segmented research and parameter optimization of double-layer vibrating screen

Purpose The purpose of this paper is to study the screen surface parameters of the double deck vibrating screen, in sections, to determine the influence of each part of the screen surface on the screening efficiency of the vibrating screen. Finally, the best screening parameters were calculated to obtain the best screening performance. Design/methodology/approach In this paper, the discrete element method is used to simulate the process of two-layer subsection screening. Response surface test was used to analyze the influence of various factors and their interactions on screening results. Finally, based on the binomial regression model of screening efficiency, the optimal combination of vibration parameters is calculated. Findings In the screening process of vibrating screen, due to the different screening environments in each area of the screen surface, the single-layer linear vibrating screen with equal screen surface parameters cannot obtain the best screening performance. Among the single factors, the effect of vibration frequency is the most significant. Originality/value To address the issue of single layer linear vibrating screens with equal screen surface parameters being unable to maintain optimal screening performance when handling large amounts of materials. This article proposes a double layer vibrating screen with different screen surface grids and screen surface angles to address the problem of low screening performance of traditional single layer linear vibrating screens.