清晨好,您是今天最早来到科研通的研友!由于当前在线用户较少,发布求助请尽量完整的填写文献信息,科研通机器人24小时在线,伴您科研之路漫漫前行!

On the Peculiarities of Wire-Feed Electron Beam Additive Manufacturing (WEBAM) of Nickel Alloy–Copper Bimetal Nozzle Samples

双金属 冶金 喷嘴 合金 材料科学 阴极射线 梁(结构) 电子 结构工程 工程类 机械工程 物理 量子力学
作者
K. S. Osipovich,V. М. Semenchuk,A. V. Chumaevskii,D. A. Gurianov,Alexander M. Korsunsky,В. Е. Рубцов,Е. А. Колубаев
出处
期刊:Crystals [Multidisciplinary Digital Publishing Institute]
卷期号:14 (11): 976-976
标识
DOI:10.3390/cryst14110976
摘要

In order to gain insight into the unique characteristics of manufacturing large-scale products with intricate geometries, experimental nozzle-shaped samples were created using wire-feed electron beam additive technology. Bimetal samples were fabricated from nickel-based alloy and copper. Two distinct approaches were employed, utilizing varying substrate thicknesses and differing fabrication parameters. The two approaches were the subject of analysis and comparison through the examination of the surface morphology of the samples using optical microscopy, scanning electron microscopy, and X-ray diffraction analysis. It has been demonstrated that the variation in heat flux distributions resulting from varying the substrate thicknesses gives rise to the development of disparate angles of grain boundary orientation relative to the substrate. Furthermore, it is demonstrated that suboptimal choice of the fabrication parameters results in large disparities in the crystallization times, both at the level of sample as a whole and within the same material volume. For example, for the sample manufacturing by Mode I, the macrostructure of the layers is distinguished by the presence of non-uniformity in their geometric dimensions and the presence of unmelted wire fragments. In order to characterize the experimental nozzle-shaped samples, microhardness was measured, uniaxial tensile tests were performed, and thermal diffusivity was determined. The microhardness profiles and the mechanical properties exhibit a higher degree of strength than those observed in pure copper samples and a lower degree of strength than those observed in Inconel 625 samples obtained through the same methodology. The thermal diffusivity values of the samples are sufficiently close to one another and align with the properties of the corresponding materials in their state after casting or rolling. The data discussed above indicate that Mode II yields the optimal mechanical properties of the sample due to the high cooling rate, which influences the structural and phase state of the resulting products. It was thus concluded that the experimental samples grown by Mode II on a thinner substrate exhibited the best formability.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
西山菩提完成签到,获得积分10
9秒前
葛怀锐完成签到 ,获得积分10
12秒前
燕晓啸完成签到 ,获得积分0
23秒前
一一一多完成签到 ,获得积分10
46秒前
zhangsan完成签到,获得积分10
47秒前
传奇3应助Kevin采纳,获得10
51秒前
1分钟前
floyd发布了新的文献求助10
1分钟前
1分钟前
搜集达人应助科研通管家采纳,获得10
1分钟前
顾矜应助floyd采纳,获得10
1分钟前
白天科室黑奴and晚上实验室牛马完成签到 ,获得积分10
1分钟前
刘刘pf完成签到 ,获得积分10
1分钟前
David发布了新的文献求助10
1分钟前
火星上惜天完成签到 ,获得积分10
1分钟前
1分钟前
可夫司机完成签到 ,获得积分10
2分钟前
科研通AI5应助001采纳,获得10
2分钟前
艺霖大王完成签到 ,获得积分10
2分钟前
song完成签到 ,获得积分10
2分钟前
2分钟前
fqpang完成签到 ,获得积分10
2分钟前
2分钟前
001发布了新的文献求助10
2分钟前
小猴子完成签到 ,获得积分10
4分钟前
kmzzy完成签到,获得积分10
4分钟前
颜陌完成签到,获得积分10
4分钟前
4分钟前
5分钟前
lanxinge完成签到 ,获得积分20
5分钟前
完美世界应助jason采纳,获得10
5分钟前
5分钟前
kbcbwb2002完成签到,获得积分10
6分钟前
含糊的茹妖完成签到 ,获得积分0
7分钟前
sysi完成签到 ,获得积分10
8分钟前
风里有声音完成签到 ,获得积分10
8分钟前
科研通AI2S应助一只羊采纳,获得10
8分钟前
xl完成签到 ,获得积分10
9分钟前
科研通AI2S应助yyy采纳,获得10
10分钟前
Barid完成签到,获得积分10
10分钟前
高分求助中
Les Mantodea de Guyane Insecta, Polyneoptera 2500
Mobilization, center-periphery structures and nation-building 600
Technologies supporting mass customization of apparel: A pilot project 600
Introduction to Strong Mixing Conditions Volumes 1-3 500
Fine Chemicals through Heterogeneous Catalysis 430
China—Art—Modernity: A Critical Introduction to Chinese Visual Expression from the Beginning of the Twentieth Century to the Present Day 430
Multichannel rotary joints-How they work 400
热门求助领域 (近24小时)
化学 材料科学 医学 生物 工程类 有机化学 物理 生物化学 纳米技术 计算机科学 化学工程 内科学 复合材料 物理化学 电极 遗传学 量子力学 基因 冶金 催化作用
热门帖子
关注 科研通微信公众号,转发送积分 3795624
求助须知:如何正确求助?哪些是违规求助? 3340645
关于积分的说明 10300905
捐赠科研通 3057168
什么是DOI,文献DOI怎么找? 1677539
邀请新用户注册赠送积分活动 805449
科研通“疑难数据库(出版商)”最低求助积分说明 762626