材料科学
阳极
双层
电解质
电极
多孔性
退火(玻璃)
纳米技术
电化学
化学工程
电接点
MXenes公司
渗透(战争)
储能
氧化还原
光电子学
电阻和电导
金属
电阻率和电导率
电流密度
集电器
图层(电子)
活动层
复合材料
接触电阻
作者
Tae Hyeon Park,Ki Yun Kim,Jea Uk Lee
出处
期刊:Batteries
[Multidisciplinary Digital Publishing Institute]
日期:2026-10-16
卷期号:12 (10): 433-433
标识
DOI:10.3390/batteries12100433
摘要
The structural design of self-standing electrodes without binders and current collectors is critical for maximizing the energy density of lithium-ion batteries, yet achieving electrical conductivity, ion accessibility, and mechanical integrity in a single architecture remains challenging. Although Ti3C2Tx MXene is a promising candidate, owing to its high metallic conductivity and structural robustness, conventional dense films suffer from restacking-induced restricted electrolyte penetration and Li+ diffusion. Conversely, porous MXene foams can mitigate restacking but exhibit weak electrical contact and limited mechanical robustness. To overcome this structural trade-off, we designed a self-standing MXene film/foam bilayer anode integrating a compact film layer with a porous foam layer, which was followed by air annealing to generate TiO2/TiOx-containing active sites. Among the various film/foam ratios systematically evaluated, the optimal 2:8 bilayer electrode exhibited low charge-transfer resistance and fast redox kinetics, delivering 83.24 mAh g−1 at 1000 mA g−1 and retaining 195.12 mAh g−1 at 50 mA g−1 after 200 cycles, outperforming the single-architecture electrodes. These results demonstrate that the bilayer design effectively combines the structural and electrical stability of the film with the rapid ion transport and abundant active sites of the foam, offering a promising strategy for high-performance self-standing anodes.
科研通智能强力驱动
Strongly Powered by AbleSci AI