Abstract This work is aimed at developing and industrially testing a comprehensive digital method for certifying the flatness of cold-rolled strips, in order to provide a system for the transition from occasional visual inspection to full-scale, real-time quality monitoring. The methodology provides for the implementation of a continuous measurement unit using a stress meter that generates two-dimensional residual stress distribution maps (a digital twin of the coil), and an intelligent certification unit with automatic signal classification on a three-level scale. In the scope of the system testing, a problematic coil of DC04 grade steel with a defect in the form of a one-sided right-hand wave is analyzed in detail. The developed approach provides a metrologically sound basis for prompt technological decision-making, which serves as a prerequisite for the development of a closed-loop control system. The prospects for a future development of the system consist in the integration thereof into control loops, which opens the potentialities of transition from the passive detection of flatness defects to an active predictive prevention thereof.