阴极发光
材料科学
薄膜
锌
微晶
旋涂
透射率
分析化学(期刊)
光电子学
纳米技术
化学
发光
冶金
色谱法
作者
E. Elmahboub,A. El Hamidi,A. El Hichou,M. Mansori
出处
期刊:Semiconductors
[Pleiades Publishing]
日期:2021-12-01
卷期号:55 (S1): S80-S87
被引量:2
标识
DOI:10.1134/s1063782621100109
摘要
Abstract The zinc chloride precursor has been used to deposit the zinc oxide (ZnO) thin films by sol–gel spin-coating technique from aqueous solution onto glasses substrates at optimum conditions. The effect of the zinc precursor concentration on the structural, optical, and cathodoluminescence properties of ZnO thin films has been investigated. The X-ray diffraction analysis showed typical patterns of the hexagonal ZnO structure for all films, and the increase of the crystalline size from 22 to 43 nm. The films were polycrystalline with the (002) preferred orientation. The optical transmittance measurements of ZnO thin films has shown that they are all transparent in the visible region and then decrease with the rise of precursor content up to 0.4 M. At room temperature, the cathodoluminescence spectra show three emissions characteristics of ZnO thin film positioned at λ = 386, 527, and 650 nm labelled near-ultraviolet (UV), green, and red bands, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI