材料科学
原位
钙钛矿(结构)
氧化物
硅
化学工程
纳米技术
光伏系统
太阳能电池
能量转换效率
氧化硅
催化作用
混合太阳能电池
作者
Kunyuan Zheng,Bowen Li,Zhijun Li,Xinyu Tan,Mingyu Wang,Peng Xiang,Yiming Liu,一先 崔,Shumin Chen,Shaoyun Huang,Qian Zhou,Haichao Yang
标识
DOI:10.1016/j.cej.2026.182099
摘要
Ultraviolet (UV)-induced degradation severely limits the long-term stability of perovskite solar cells (PSCs), therefore, constructing a functional layer with both optical regulation and interfacial modulation capabilities is crucial for achieving high-performance PSCs. Here, we propose the in situ synthesis of functionalized carbon quantum dots (CQDs)-modified SiO2 nanospheres (CQDs@SiO2) for constructing a buried-interface UV down-conversion functional layer. Benefiting from the broadband UV absorption and spectral conversion capability of CQDs, the optimized CQDs@SiO2 exhibits a photoluminescence quantum yield of 68.66% under 365 nm excitation. The introduction of CQDs reduces excess hydroxyl groups on the SiO2 surface and suppresses nanosphere aggregation, thereby improving the deposition uniformity of SiO2. Furthermore, CQDs@SiO2 can passivate defects at the buried interface, retard crystallization, and relieve residual stress of the perovskite film. Ultimately, the best-performing CQDs@SiO2-modified rigid device achieves a power conversion efficiency (PCE) of 26.55% and retains 88% of its initial efficiency after 1000 hours of continuous maximum power point tracking at 55°C. Importantly, the unencapsulated device maintains ~80% of its initial efficiency after 400 hours of continuous UV irradiation in ambient air. In addition, the optimized flexible device and the scaled-up device with an active area of 1.0 cm2 achieve PCEs of 24.99% and 26.06%, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI