Investigating the Photostability of Organic Photovoltaics for Indoor and Outdoor Applications

Organic photovoltaics (OPVs) show great promise for both outdoor and indoor applications. However, there remains a lack of understanding around the stability of OPVs, particularly for indoor applications. In this work, the photostability of the poly[(thiophene)‐alt‐(6,7‐difluoro‐2‐(2‐hexyldecyloxy)quinoxaline)]:2,2′‐((2Z,2′Z)‐((4,4,9,9‐tetrahexyl‐4,9‐dihydro‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐2,7‐diyl)bis(methanylylidene))bis(3‐oxo‐2,3‐dihydro‐1H‐indene‐2,1‐diylidene))dimalononitrile blend is investigated for both outdoor and indoor applications. Photostability is found to vary drastically with illumination intensity. Devices under high‐intensity white light‐emitting diode (LED) illumination, with their short‐circuit current density ( J SC ) matching J SC–EQE for AM1.5 G illumination, lose 42% of their initial performance after 30 days of illumination. Contrastingly, after almost 47 days of illumination devices under 1000 lux white LED illumination show no loss in performance. The poor photostability under 1 sun illumination is linked to the poor photostability of IDIC. Through Raman spectroscopy and mass spectrometry, IDIC is found to suffer from photoisomerization, which detrimentally impacts light absorption and carrier extraction. In this work, it is highlighted that under low light levels, the requirement of intrinsic material photostability may be less stringent.